Are you wearing the proper PPE?

Are you wearing the proper personal protective equipment? Do you know about the many dangers that could occur if you are not prepared? We at Thompson know all about safety and are more than happy to share, teach, and train you on this information. If you read along, we will explain what you should be wearing to avoid any issues with electrical equipment.

There are plenty of hazardous events that can occur if you have the wrong or even no PPE on at all. Serious injury and even death can be the result of not being properly trained. Some of the injuries include: electric shock, severe burns, blindness, shrapnel wounds, lung blast injuries, ruptured eardrums, and pressure wave injuries. If you are wearing the proper PPE, then you will be able to avoid all of those problems.

You may not know which PPE to wear at the right time. The only way to know is to have your Arc Flash Risk Assessment completed. This is an essential assessment because it will tell you which pieces of equipment require level 1 PPE or level 4 PPE. Ask yourself, do you want to be caught in a situation where you need all the protection possible and you are only wearing level 1 equipment? The answer is probably no. Think about that the next time you are around electrical equipment, it could mean life or death for you.

We at Thompson provide Arc Flash Risk Assessments and are more than willing to come out and train you on what equipment needs certain levels of PPE. This knowledge will greatly increase the safety of your employees and that is something that we strive to achieve. Come to us for your PPE training and Arc Flash Risk Assessment needs.

For more questions or comments feel free to contact us. Our information is:
Website: www.thompsonspecialty.com
Phone: 844-321-3869
Email: help@thompsonspecialty.com

LevelsThompsonAutomation Photos

The Three Best Things to Do To Avoid OSHA Training Violations

Avoid-OSHA-LI

With OSHA’s clear message to all employers that more training needs to be completed in order to avoid violations, there are three main things that you can do in order to educate you and your employees of the importance of being compliant.

The first thing you can do is to start with education and a clear understanding of what OSHA is asking you to do. There are plenty of resources out there that can help you with that such as, the Training Requirements in OSHA Standards, and the NFPA 70E Handbook. These documents will be able to clearly explain what you need to do in order to get your employees properly trained. OSHA has now made it a requirement that the employer must train their employees. This means that in order to stay compliant and avoid violations you MUST have training complete.

The second thing is to check out the 270-page book that lists the overview and requirements of the OSHA standards. This is meant to assist employers, safety and health professionals, and training directors with what they need to know in order to keep their employees safe. Also check out the most cited violations for the past year. This will give you an idea on what to avoid and what to train your employees on.

The third thing to do would be to get started with your training schedule and keep track of what you are doing. One of the main questions that an OSHA investigator will ask is if your employees have received proper training. It’s better to have a program started rather than not at all. Keeping track of what you do shows that you are making the right steps forward.

Overlooking training isn’t something that we would recommend. It is better to get started now than to do nothing at all. Come to Thompson for your training needs, we are ready and willing to assist you in any way.

For more information regarding Thompson Training contact us at:

Phone: 844.321.3869

Email: help@thompsonspecialty.com

Website: www.thompsonspecalty.com

It’s time you had an Arc Flash study done

areyoureadybutton1

Are you ready for the new OSHA electrical safety requirements? Do you feel prepared? Have you had your Arc Flash Risk Assessment complete? If the answer is no then it is time to get started. “What is an Arc Flash?” this is one of the most frequently asked questions. An Arc Flash occurs because of a release of energy caused by an electrical arc, resulting in an explosion. The flash can reach temperatures up to 35,000 degrees Fahrenheit.

One of the main reasons to get an Arc Flash Risk Assessment is because the explosion that occurs is known to cause serious damage. With the extreme temperatures of the blast, burns account for around 80% of all the injuries. Any employee not wearing the proper Personal Protective Equipment (PPE) are also at risk of electric shock, blindness, shrapnel wounds, and in some cases death. The damage to your facility can also lead to problems such as lengthy downtime, extensive repairs, and even loss of profit. Often times a simple adjustment to your electrical systems like the breaker settings or the installation of a breaker disconnect can really help to reduce accidents.

Another reason for having an Arc Flash Risk Assessment completed is simply because it is required by OSHA. In 2014 OSHA recognized an arc flash as a “hazard” and after that, the OSHA General Duty Clause began to cover arc flash explosions. All employers need to properly implement and document electrical safety programs that direct activity to the risks involved. All Companies must now comply and have an Arc Flash Risk Assessment completed every 5 years. The leading standard and best practice in electrical safety is the NFPA 70E Handbook. Two main points from the handbook would be that the employer is required to conduct an assessment, and must hand out the proper PPE if a potentially dangerous situation arises.

Having an Arc Flash Risk Assessment completed by qualified and trained professionals is highly important. Are you ready? Contact the experienced Arc Flash specialists at Thompson Automation and Specialty Services today to perform an arc flash analysis for your facility, complex, office, or campus.

For more information contact:

Phone: 844-321-3869

Email: sales@thompsonspecialty.com

Website: www.thompsonspecialty.com

 

OSHA’s Most Cited Violation in 2017 was TRAINING

We-Know-Safety-Training

Given the nearly 5,000 recorded OSHA violations in 2017 related to Training it’s time to look at your companies training programs and make sure you are covered and not in violation of an OSHA rule.  Not only are nearly one-fifth of all OSHA violations in 2017 related to training, the #9 reason for citations alone was improper training related to fall protection.  OSHA is sending a very clear message to all employers; train your employees!

If you are wondering what to do then, the first place to start is with education and an understanding of what OSHA is asking you to do.  OSHA requires explicitly that the employer must train employees in the safety and health aspects of their job.  One place to find this information is in the Training Requirements in OSHA Standards, a 270-page book that provides a general overview of training standards, requirements, and related topics.  The book is to assist employers, safety and health professionals, and training directors with what they need to know regarding OSHA’s training-related requirements. You could also just start by looking at the list of most cited violations.

Ask yourself: Do your employees handle or work around dangerous chemicals?  Are we properly locking out when we work on electrical gear?  Have we conducted the proper electrical safety training or taught our employees on the proper use of fall safety equipment?  If the answer is ‘Yes’ and you are not conducting training – you better start.

As a nationally recognized leader of electrical safety and electrical preventative maintenance testing, Thompson Automation and Specialty Services is also a leader in electrical safety, preventative maintenance and technical training.  Thompson Training offers more than 60 specific courses in the areas of electrical safety and electrical preventative maintenance.  This breadth of courses provides us the opportunity to design a unique curriculum for your staff’s specific needs.  Whether the course is Electrical Safety for Non-Electrical Personnel, OSHA 30, or training on the most recent NFPA 70E 2018 updates; our expert trainers will connect with your team to deliver an impactful training session that increases your teams’ knowledge. Start 2018 off with a customized safety training plan.

SAFETY

Electrical Safety-Related Work Practices – Provide training to high-risk workers and management on OSHA requirements and the prevention of serious injuries from electrical hazards on the worksite. (OSHA Sub part S – Electrical)

Personal Protective Equipment (PPE) for Electrical Safety – Selecting, using and care of PPE used for arc flash and shock protection.

OSHA 30 – 30 hours of Regulations training over a minimum of 4 days, Introduction to OSHA, OSHA inspections, OSHA’s focus Four, (Falls, Struck By, Caught in-between, Electrocution), Confines Spaces, Ladders and Stairs, Scaffolding, Cranes, PPE, Excavations, tools, etc. (Training can be tailored to focus specific business hazards)

PREVENTIVE MAINTENANCE

Electrical Preventative Maintenance Training – Infrared testing, good housekeeping practices, early failure indicators.

Troubleshooting Fundamentals – What to look for when troubleshooting electrical hazards, questions to ask.

TECHNICAL

Electrical Fundamentals – How electricity works, electrical applications, differences between the power at your house and your business.

NFPA 70E – Latest NFPA changes and how they affect your employees, NFPA & OSHA relationship

NEC® National Electrical Code Training – The latest changes to the National Electrical code and what those changes mean to your business.

If you want additional information don’t hesitate to contact us. Our phone number is 712-224-3873 and our website is www.thompsonspecialty.com. Again, thank you for attending and we hope to hear from you soon!

Jason Glover
General Manager

What does the new NFPA 70E 2018 Standard mean to you?

NFPA70E-BoxChecking-Blog3

The NFPA 70E has been the go-to playbook for electrical safety practices since 1979 when it was first published. To keep it updated and current, every three years it is revised to include new regulations and requirements for electrical safety. The 11th edition, also known as the 2018 version, is right around the corner and there are hundreds of minor and major revisions specifically, regarding Arc Flash that you need to educate yourself on.

So, what does all this mean to you the employer? Why should you care?

Complying with consensus standards can be difficult. NFPA 70E offers electrical safe work practices for the industry. The NFPA 70E is a how-to-comply instruction manual for several of OSHA’s regulations including electrical hazard assessments and how to select the appropriate PPE for electrical hazards. It is however ever changing and keeping up with all the changes can be difficult.

OSHA enforces compliance to NFPA 70E using Section 5(a)(1) of the Occupational Safety and Health Act of 1970, which is commonly referred to as the GENERAL DUTY CLAUSE, as the basis for implementation. As the employer, you “shall furnish to each of its employees’ employment and a place of employment which are free from recognized hazards that are causing or likely to cause death or serious physical harm to employees.” As a result, companies can be cited by OSHA for non-compliance of NFPA 70E.

It is more important than ever that you utilize a third party that specializes in Arc Flash Risk Assessments and has the experience and knowledge of the OSHA and NFPA 70E requirements. Call Thompson Automation and Specialty Services today at 844.321.3869 to learn more and to find out how we can help you stay compliant with OSHA and the new NFPA 70E standards.

www.thompsonspecialty.com

 

Keep Your Electrical Gear Clean and Tight

Electrical failures often can be avoided and good preventative maintenance programs can help predict the imminent failure of equipment.  According to the Institute of Electrical and Electronics Engineers (IEEE), the failure rate of electrical equipment is three times higher when electrical preventive maintenance programs are not performed. This tells us that electrical failures can be avoided.

CoreyBox2

But what should be included in a good electrical preventative maintenance program (EPM). There are so many things that could be done.  Equipment maintenance, cleaning, and thermal imaging are just a few of the things to be considered.  However, where does one put the priority?  Just consider the top causes of failure in electrical system: loose connections, improperly installed parts, defective/inadequate insulation, foreign objects causing short-circuiting, overloading inadequate capacity, and the accumulation of dust, dirt and oil.  All things that can be prevented with routine and systemic electrical inspections.

Common in all these causes of electrical equipment failure is gear not being clean and well maintained.  Here are things to keep in mind when developing an EPM.

  1. Keep your gear clean. The buildup of dirt and metal debris in an electrical enclosure can cause arcing and arc flash explosions. A second issue brought about by the buildup of dirt and debris is an increase in heat and the temperature of the electrical equipment.  Restricted airflow and an increase in the temperature of gear decreases the quality and usable life of the equipment.  Finally, a dirty environment also creates a hospitable home for rodents and vermin. Dust is not your only enemy in dirty environments and lurking to cause problems.
  2. Keep your gear tight. Loose connections are a major cause of electrical failures. Greater than 75% of the problems uncovered during routine thermal imaging inspections are loose connections. Thermography (infrared scanning) is a common way to identify areas that need repair but must be done while the gear is energized. While the gear is off and being cleaned why not take an extra minute to check and tighten those loose connections.

If you have more questions or are looking for ideas and more information on best practice electrical preventative maintenance programs give the experts at Thompson Automation and Specialty Services a call today.  Given their 85+ years of experience as an electrical contractor, Thompson specializes in the development of custom electrical preventative maintenance programs for customers across the country.  Thompson understands the importance of keeping facilities safe, efficient and operating at peak performance and can custom tailor a program for you.

www.thompsonspecialty.com

Nebraska Safety Council Conference and Trade Show

NebraskaSafetyGoood

Thompson Automation and Specialty Services was pleased to support the Nebraska Safety Council Conference and Trade Show October 11th and 12th, 2017 at the Cornhusker Marriott Hotel in Lincoln, NE. This exciting conference brought together a larget group of safety professionals to keep current on a broad range of issues, get valuable training, and network with colleagues and industry experts. Jason Glover of Thompson was there to discuss some of the new OSHA, NFPA 70E, electrical safety and preventive maintenance needs for the varying industries in Nebraska.
 
Thompson strongly supports the Nebraska Safety Council and WorkWell mission of enhancing Nebraska’s safety initiatives by offering professional training, education and technical assistance. Great training and great technology allows the industry to propel itself forward and provide innovative solutions to solve Nebraska largest safety issues. Thompson Automation and Specialty Services provides automation & controls support and specialty electrical services to help our customers operate their facilities more efficiently, keep in compliance with government and safety standards, run electrical systems at optimal energy efficiency levels, and help reduce the ever-growing energy costs. Services like Arc Flash Risk Assessment, Thermal Imaging, Breaker Testing, Electrical Preventative Maintenance, and courses in Electrical Safety Training all help keep a work environment safe and free from accidents.
Contact us today for more information on how we can help your business operate safely, energy efficiently, cost-effectively, and in compliance for years to come.